SAPO-34提升铁钒基催化剂抗碱性能研究

采用浸渍法制备Fe-VO_x/SAPO-34和Fe-VO_x/TiO₂脱硝催化剂,探究SAPO-34分子筛与TiO₂两种载体负载铁钒基氧化物催化活性及抗碱性能的差异。借助X射线衍射(XRD)、X射线光电子能谱(XPS)、氨气程序升温脱附(NH₃-TPD)、氢气程序升温还原(H₂-TPR)、原位红外漫反射(in-situ DRIFTs)等表征手段对催化剂的骨架结构、表面物化性质、氧化还原能力以及对反应气体的吸脱附情况进行分析。结果表明:SAPO-34分子筛内部特定的孔道结构和稳定的骨架,有利于活性组分在载体上均匀分散,降低碱金属对表面活性中心的物理覆盖作用;同时其表面丰富的酸位点能够作为碱金属捕获位,保护催化剂表面的活性中心,保证催化剂的吸附-反应过程能够正常进行,从而使Fe-VO_x/SAPO-34表现出良好的抗碱金属能力。     

The character and the wave front set correspondence in the stable range

We relate the distribution characters and the wave front sets of unitary representation for real reductive dual pairs of type I in the stable range.     

循环流化床粉煤灰可控制备高纯F型八面沸石研究

利用粉煤灰制备沸石分子筛是其高值化利用的重要方向之一.以循环流化床粉煤灰为原料,采用酸浸预处理-氢氧化钠碱熔活化-水热晶化法制备F型八面沸石,并用于吸附亚甲基蓝.考察酸浸温度、碱熔温度及碱灰质量比对粉煤灰结构的影响及碱熔温度、碱灰质量比、液固比及晶化时间对沸石的结构和形貌的影响.通过XRD和SEM对粉煤灰沸石的晶体结构和形貌进行表征.结果表明,利用循环流化床粉煤灰制备高纯F型八面沸石适宜条件为碱熔温度550℃,碱灰质量比1.5:1,液固比12 mL/g,晶体导向剂用量10;,晶化温度100℃,晶化时间20 h.其比表面积高达357 m2/g,且对亚甲基蓝的饱和吸附量高达178 mg/g.     

Synthesis and stability evaluation of hierarchical silicoaluminophosphates with different structural frameworks in the methanol to olefins process

Silicoaluminophosphates (SAPOs) with different pore structures were synthesized through the implementation of polyethylene glycol (PEG) as a mesopores impregnation agent. Using PEGs with different molecular weights (MWs) and concentrations in the synthesis precursor, several samples were synthesized and characterized. Applying a PEG capping agent to the precursors led to the formation of tuned mesopores within the microporous matrix of the SAPO. The effects of the PEG molecular weight and PEG/Al molar ratio were investigated to maximize the efficiency of the catalyst in the methanol-to-olefin (MTO) process. Using PEG with a MW of 6000 resulted in the formation of both Zeolite Rho and chabazite structural frameworks (i.e., DNL-6 and SAPO-34). Pure SAPO-34 samples were successfully prepared using PEG with a MW of 4000. Our results showed that the PEG concentrations affect the porosity and acidity of the synthesized materials. Furthermore, the SAPO-34 sample synthesized with PEG (MW of 4000) and a PEG/Al molar ratio of 0.0125 showed a superior catalytic stability in the MTO reaction owing to the tuned bi-modal porosity and tailored acidity pattern. Finally, through reactivation experiments, it was found that the catalyst is stable even after several regeneration cycles.     

Micron-Sized Zeolite Beta Single Crystals Featuring Intracrystal Interconnected Ordered Macro-Meso-Microporosity Displaying Superior Catalytic Performance

Zeolite Beta single crystals with intracrystalline hierarchical porosity at macro-, meso-, and micro-length scales can effectively overcome the diffusion limitations in the conversion of bulky molecules. However, the construction of large zeolite Beta single crystals with such porosity is a challenge. We report herein the synthesis of hierarchically ordered macro-mesoporous single-crystalline zeolite Beta (OMMS-Beta) with a rare micron-scale crystal size by an in situ bottom-up confined zeolite crystallization strategy. The fully interconnected intracrystalline macro-meso-microporous hierarchy and the micron-sized single-crystalline nature of OMMS-Beta lead to improved accessibility to active sites and outstanding (hydro)thermal stability. Higher catalytic performances in gas-phase and liquid-phase acid-catalyzed reactions involving bulky molecules are obtained compared to commercial Beta and nanosized Beta zeolites. The strategy has been extended to the synthesis of other zeolitic materials, including ZSM-5, TS-1, and SAPO-34.     

Synthesis and characterization of VO–vanillin complex immobilized on MCM-41 and its facile catalytic application in the sulfoxidation reaction,and synthesis of 2,3-dihydroquinazolin-4(1H)-ones and disulfides in green media

In this work, a vanillin complex is immobilized onto MCM-41 and characterized by FT-IR, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and BET techniques. This supported Schiff base complex was found to be an efficient and recoverable catalyst for the chemoselective oxidation of sulfides into sulfoxides and thiols into their corresponding disulfides (using hydrogen peroxide as a green oxidant) and also a suitable catalyst for the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives in water at 90°C. Using this protocol, we show that a variety of disulfides, sulfoxides, and 2,3-dihydroquinazolin-4(1H)-one derivatives can be synthesized in green conditions. The catalyst can be recovered and recycled for further reactions without appreciable loss of catalytic performance.     

Co-hydrolysis and Seed-Induced Synthesis of Basic Mesoporous ZSM-5 Zeolites with Enhanced Catalytic Performance

For zeolite catalysts, the regulation of active site and pore structure plays an important role in the enhancement of their catalytic performance. In this work, a one-pot and organic template-free co-regulation route is proposed to straightforwardly synthesize basic mesoporous ZSM-5 zeolites with adjustable alkaline-earth metal species. The synthesis pathway combines two decisive strategies: 1) the seed-induced interface assembly growth method and 2) the acidic co-hydrolysis/condensation of aluminosilicate species and alkaline-earth metal (e.g., Mg, Ca, Sr, or Ba) sources. It is interesting that the mesoporous structure was self-evolved through particle-attached seed-interfacial crystallization without the assistance of any template. Meanwhile, the incorporation of alkaline-earth metals species is homogeneous and highly dispersed in the solid products during the whole crystallization process, and finally generate the superior basicity. Catalysis tests of the as-synthesized samples displayed their novel performance in the typical base reaction of Knoevenagel condensation, even for bulky substrates owing to the enhanced diffusion arising from the meso/microporous network. This finding opens new possibilities for facile, cost-effective, and environmentally friendly synthesis of mesoporous high-silica zeolites with tunable acid/base properties, and deepens our understanding of the particle-attached crystallization.     

固体核磁共振结合密度泛函理论计算研究SSZ-39分子筛的钠离子落位与铝分布

具有AEI结构的SSZ-39分子筛的骨架外阳离子落位和铝分布对其催化性能影响显著.AEI笼中有三个结晶学不等价位，且铝取代T位具有一定的倾向性.本文结合固体核磁共振（NMR）技术（²⁷Al/²³Na MQ MAS NMR），以及密度泛函理论（DFT）计算，研究了不同硅铝比Na-SSZ-39分子筛中的Na⁺落位和铝分布.在孤立铝分布的情况下，铝原子优先占据于T3位，Na⁺主要落位于AEI笼中的SIIa0和SIII'a0位点上，其中SIII'a0位点的优先度较高，此外少部分Na⁺还落位于六棱柱内部的SIa0.当铝对存在时，AlSiSiAl分布的铝对占据六元环的对位（T3-T3），对应的Na⁺分别落位于SIIa1和SⅢ'a1位点.随着分子筛结构的部分破坏，游离的Na⁺可能形成明显的SIII'b位点.本文可加深对SSZ-39分子筛构效关系的理解，为更好地调控催化性能奠定基础.